Hansford County Drum Pumps

Hansford County Air-Operated Diaphragm Chemical Pumps and Their Applications

Hansford County Air-Operated Diaphragm Chemical Pumps and Their Applications

An Air Operated Diaphragm Chemical Pump is a type of positive displacement pump that uses a combination of compressed air and an elastic diaphragm to move chemical liquids. This type of pump is often used in industrial settings, such as chemical processing plants and water treatment facilities, due to its ability to handle high flow rates and corrosive materials. It’s also known for its superior design, as it can run dry without causing damage, making it more reliable than other types of pumps.

These pumps are highly versatile and have a wide range of applications. They are often used in the chemical, pharmaceutical, and food industries, as well as in industrial, agricultural, and water treatment operations. Air Operated Diaphragm Chemical Pumps can be used to transfer, meter, or dispense low to high-viscosity fluids and chemicals while providing precise, accurate flow rates with minimal maintenance.

Hansford County CENTRIFUGAL PUMPS

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Hansford County CENTRIFUGAL PUMPS

  • Sealless design improves reliability with no seal maintenance to perform or seal leaks
  • High specific gravity handling – over 1.8
  • Two stage versions contain two impellers, three stage versions contain three impellers
  • High power neodymium magnetic drive system handles high specific gravity fluids
  • Heads up to 300 feet (91.5m)
  • Compact close-coupled design
  • Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
  • Horizontal or vertical (with IEC motor only) installation
  • Minimum flow rate is 1 gpm (.23m3/h)
  • Maximum working pressure up to 135 PSI (9.3 bar)

Air-Operated Diaphragm Chemical Pumps in Hansford,

Helping Industrial Hansford displacement pump needs.

Hansford County Small Centrifugal Pumps and How They Work

Centrifugal pumps use a rotating impeller to move fluid through a system. This impeller, which is a disk with vanes or blades attached to it, is driven by a motor and the rotation exerts a centrifugal force that causes the fluid to move away from the center of the disk. Due to the difference in pressure caused by this movement, the fluid is drawn into the pump and moved through the system. In addition to transferring fluids, these pumps can be utilized to transport gases.

Hansford County Small Centrifugal Pumps and How They Work

Hansford County Drum Pump Accessories

  • Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
  • Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
  • SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
  • Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
  • Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
  • AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
Hansford County Drum Pump Accessories

Small Centrifugal Pumps in Hansford,

High flow rates and capacity to handle large volumes of fluid!

0 Item | $0.00
View Cart
Call Now Button