Industrial Chemical Cartridge Filters & Bag Filters

Filter Cartridges

Filter Cartridges

Bag Filters • Cartridge Filters • Duplex Filters • Standard & Custom Design • Polypro

Bag filters come in many diameters and lengths. Common industrial sizes are 4″ and 7″ in diameter with lengths up to 32″. Constructed of Polyester, Polypropylene, Nylon, Nomex, and Teflon bags are available from 1 to 1500 microns. Multilayer, high efficiency, oil-absorbing, and high-temperature designs make this filtration media very adaptable. Bags are easy to change out and are inexpensive. 

We offer many different cartridges depending on the application. Pleated filters offer a large surface area to reduce pressure drop and maximize filter life. Wound and melt-blown cartridges offer a very economical depth-type cartridge. For higher viscosity resin bonded filters will handle higher differential pressures. Filters have micron ratings from 0.1 to 400 microns. Filter media can be Polypropylene, Polysulfone, Teflon, Nylon 6,6, Plus+ Nylon 6,6, in membrane absolute rated and nominal rated. We also offer stainless steel wire mesh cleanable cartridges. 

Pleated Polypropylene Filtration Cartridges

Pleated Polypropylene Filtration Cartridges

Food & Beverages • Photographic • Deionized Water • Pre-Filtration • Cosmetics 

Economy pleated polyester melt-blown cartridges offer a highly efficient and cost-effective filtration option for use in a wide variety of applications. These cartridges are constructed of FDA materials and are assembled using the latest thermal-bonding equipment. Cartridges are offered in DOE and 222 end configurations as well as in both nominal (90%) and absolute (to 99.98%) retention efficiencies.  

High Purity - FG Filtration Cartridges

High Purity – FG Filtration Cartridges

Membrane • Pre-Filtration • Sterile Air • Corn Syrup • Aromatic

Pleated micro-glass cartridges offer an economical, absolute-rated, filtration solution for both liquids and gases. They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles. FG cartridges are constructed with absolute-rated borosilicate micro-glass media that offers high dirt loading capacities. The natural positive charge of the glass also aids in the retention of negatively charged particulates such as bacteria, endotoxins, and a variety of colloidal materials. FG cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies. 

Economy - PEE Pleated Polyester Melt-Blown Cartridge

Economy – PEE Pleated Polyester Melt-Blown Cartridge

Food & Beverage • Photographic • Plating Chemicals • Synthetic • Solvents • Process Water

Economy pleated polyester melt-blown cartridges offer a highly efficient and cost-efficient filtration option for use in a wide variety of applications. These cartridges are constructed of FDA materials and are assembled using the latest thermal-bonding equipment. Cartridges are offered in DOE and 222 end configurations as well as in both nominal (90%) and absolute (to 99.98%) retention efficiencies. 

LiquidClear GF - Synthetic Pleated Cartridge

LiquidClear GF – Synthetic Pleated Cartridge

Wide Variety of Micron Ratings • Excellent Compatibility • Cooling Water • Drinking Water

This pleated design offers significantly increased surface area and loading capacity when compared to depth cartridges (string wound, melt-blown, and resin-bonded). It has excellent compatibility with a wide range of chemicals and sanitizing agents.

HF Series High Flow Filteration Cartridges

HF Series High Flow Filteration Cartridges

HF Series High Flow Cartridges address your need for absolute-rated filter cartridges in high-flow rate applications. HF series cartridges are designed for use as a direct replacement to the Highflow Ultipleat and 3M 740 series elements. Filtration efficiencies exceed 99%.  

High Purity Polysulfone (PS) Membrane Filtration Cartridges

High Purity Polysulfone (PS) Membrane Filtration Cartridges

Hydrophilic Polysulfone Membrane Cartridges are an exceptional choice for high-purity water and aqueous fluid applications. GHPS series cartridges offer extremely high flow rates and service life while filtering. These cartridges are constructed using high-purity polypropylene support materials and hardware and assembled using the latest thermal-bonding equipment. This results in an exceptionally clean cartridge that rinses to 18M(omega) with minimal throughput. The extended area option (GHPSX) offers up to 40% more surface area. These additional areas result in significant increases in flowrate and loading capacity in the same footprint. 

High Purity - Water Service Grade PES Filtration Cartridges

High Purity – Water Service Grade PES Filtration Cartridges

Water service grade PES cartridges are cost-effective alternatives to general and electronic grade cartridges for a variety of aqueous-based fluids. Water service cartridges are manufactured from an inherently hydrophilic PES membrane. These cartridges offer excellent flow characteristics, extended service life, and broad chemical compatibility.  

High Purity – General Grade PES Filtration Cartridges

General-grade PES cartridges are designed for general-purpose use whenever a cost-effective membrane filter is required. These cartridges are inherently hydrophilic. The offer excellent flow characteristics, excellent service life, and broad chemical compatibility. The extended area option (GGPESX) offers up to 40% more surface area. These additional areas result in significant increases in flow rate and loading capacity in the same footprint.  

High Purity - Electronics Grade PES Filtration Cartridges

High Purity – Electronics Grade PES Filtration Cartridges

Electronics Grade PES Cartridges are designed to meet the special needs of the electronics and high-purity chemical industries. GGPES membrane cartridges are resistant to most acids and bases and are compatible with most sanitizing agents. The GGPES series delivers high flow rates at low-pressure drops; making it an excellent choice for Ultra-Pure water systems. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultraclean effluent as well as ultra-low extractable. The Extended Area option (GGPESX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading capacity in the same footprint.

High Purity - Food & Beverage Grade PES Filtration Cartridges

High Purity – Food & Beverage Grade PES Filtration Cartridges

Food and Beverage Grade PES Cartridges have been designed to comply with all FDA requirements for the food industry. The polyethersulfone membrane exhibits low protein-binding characteristics; making the GFPES series an excellent choice for fermented beverage applications. Each cartridge is flushed with high purity DI water and 100% integrity tested to ensure the delivery of clean effluent as well as low extractables. The Extended Area option (GFPESX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.

High Purity – FluoroClear Pleated All-Fluorocarbon Cartridges

FluoroClear Cartridges are designed for highly aggressive wet-etch and cleaning applications. FluoroClear cartridges are constructed with 100% fluorocarbon materials, providing broad chemical compatibility and temperature resistance. The PTFE membrane delivers high flow rates and high-purity effluent at low-pressure drops. Cartridges are available as flushed & dried or as wet-packed (High Purity DI water/ hydrogen peroxide solution). FluoroClear cartridges are manufactured in a clean room environment to ensure product cleanliness.

General Grade Nylon 6,6 & Plus+ Nylon 6,6 Filtration Cartridges

General Grade Nylon 6,6 Cartridges are designed for general-purpose use wherever a cost-effective membrane filter is required. GFHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. The Extended Area option (GGHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading-capacity in the same footprint.

Electronics Grade Nylon 6,6 & Plus+ Nylon 6,6 Filtration Cartridges

Electronics Grade Nylon 6,6 Cartridges are designed to meet the special needs of the electronics and high-purity chemical industries. GEHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultraclean effluent as well as ultra-low extractables. The Extended Area option (GEHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading-capacity in the same footprint.

High Purity – Food & Beverage Grade Nylon 6,6 Filtration Cartridges

Food and Beverage Grade Nylon 6,6 Cartridges have been designed to comply with all FDA requirements for the food industry. GFHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating (such as endotoxins). Each cartridge is flushed with high-purity DI water and 100% integrity tested to deliver clean effluent as well as low extractables. The Extended Area option (GFHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading-capacity in the same footprint.

High Purity – General Grade Nylon 6,6 and Plus+ Nylon 6,6 Filtration Cartridges

General Grade Nylon 6,6 Cartridges are designed for general-purpose use wherever a cost-effective membrane filter is required. GFHNY cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. The Extended Area option (GGHNYX) offers up to 40% more surface area. This additional area results in significant increases in flow rate and loading-capacity in the same footprint.

Thermally Bonded Bi-Component Filtration Cartridges

Thermally-bonded polyolefin fibers are used in the construction of Bi-component series filter cartridges. The unique fiberto-fiber bond forms a very stable porosity. The patented construction process of these BiComponent filter cartridges provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a 3-dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in fiber matrix throughout the life of the filter. This delivers consistently precise filtration and ensures against contaminant unloading.

Water Grade Polypropylene Melt-Blown Cartridge – GWTB

• Unique & proprietary process delivers superior efficiency, life and economy
• Excellent compatibility with a wide range of chemicals
• Graded density pore structure enhances dirt holding capacity
• Easy cartridge incineration and disposal
• All polypropylene construction
• All end configurations available (glued or thermally-bonded)

Water Grade BB – Size Polypropylene Melt-Blown Cartridge – GWTB

• Unique & proprietary process delivers superior efficiency, life and economy
• Excellent compatibility with a wide range of chemicals
• Graded density pore structure enhances dirt holding capacity
• Easy cartridge incineration and disposal
• All polypropylene construction
High Performance Grade Polypropylene Melt-Blown Cartridge - GCTB

High Performance Grade Polypropylene Melt-Blown Cartridge – GCTB

• Unique & proprietary process delivers superior efficiency, life and economy
• Excellent compatibility with a wide range of chemicals
• Graded density pore structure enhances dirt holding capacity
• Easy cartridge incineration and disposal
• All polypropylene construction
• All end configurations available (glued or thermally-bonded)
Absolute Grade Polypropylene Melt-Blown Cartridge - GATB

Absolute Grade Polypropylene Melt-Blown Cartridge – GATB

• Controlled fiber diameter and density maximizes removal efficiency and ensures consistent performance
• Excellent compatibility with a wide range of chemicals
• Easy cartridge incineration and disposal
• All polypropylene construction
• All end configurations available (glued or thermally bonded)
• Resists contaminant unloading, even at elevated differential pressures
• Grooved exterior increases surface area
Wound Depth Cartridges

Wound Depth Cartridges

• Available in a wide variety of lengths and micron ratings from 9.75 to 50 inches and 0.5-400 µ
• Medias to fit all applications including: FDA polypropylene, bleached cotton, FDA bleached cotton, natural cotton, polyester, nylon and glass
• Core materials include: polypropylene, 304 & 316 stainless steel, tin and glass • Performance-enhancing end-configurations available to fit every process requirement
G.E.M Reverse Osmosis Membrane

G.E.M Reverse Osmosis Membrane

G.E.M. Reverse Osmosis Membranes provide the high salt rejection and flow rates typically available on composite membranes while providing superior value.

SS Series

SS Series

• Ideal for high temperature applications up to 500°F (260°C) and high differential pressures up to 60 PSID
• 304L and 316L Stainless Steel construction for compatibility with a wide range of fluids
• 2 through 840 microns ratings for broad range of uses from fine filtration to straining
• Available in cylindrical and pleated configurations for cost effective and extra service life requirements
• Cleanable and reusable
• All welded construction provides highest mechanical strength cartridges
• End cap configurations available in DOE, 222/Flat, 226/Flat, 1″ MNPT or 1″ FNPT fittings
SCB Series

SCB Series

• Extruded activated carbon block filter
• High adsorptive capacity – effectively reduces chlorine and organic chemicals that contribute to undesirable tastes and odors
• 5 micron filtration – high retention efficiency
• Minimal release of carbon fines
• No channeling, no fluidizing or bypass
• Competitively priced versus Granular Activated Carbon cartridges (GAC)
• Performance tested and verified by independent laboratory
• Available in standard 2 3/4″ and 4 1/4″ (BB Style) diameter configurations
Filter Bags

Filter Bags

• Micron ratings from 1.0 to 50.0
• All industry-standard and custom sizes available
• Choice of steel or molded plastic snap seal V-rings
• Broad chemical compatibility
• Excellent oil-absorbing capabilities (POMF)
• Handles standard on all bags
• Efficiency ratings to 95.0%
0 Item | $0.00
View Cart
Call Now Button