Industrial Chemical Pumps in Stewart County

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Stewart County CENTRIFUGAL PUMPS

• Heads up to 300 feet (91.5m)
• High specific gravity handling – over 1.8
• Two stage versions contain two impellers, three stage versions contain three impellers
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• High power neodymium magnetic drive system handles high specific gravity fluids
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• Compact close-coupled design
• Horizontal or vertical (with IEC motor only) installation
• Minimum flow rate is 1 gpm (.23m3/h)
• Maximum working pressure up to 135 PSI (9.3 bar)

Practical Applications for Drum Pumps in Stewart County

• Water treatment: In water treatment facilities and other locations where clean water is required, drum pumps are used to move water and other fluids.
• Drum pumps are used in power generation facilities, such as nuclear power plants and coal-fired power plants, to move fluids.
• Manufacturing: Fluids like coolants, lubricants, and cleaning agents are transferred using drum pumps in manufacturing settings.
• Agriculture: Drum pumps are used to deliver water and other fluids to plants and crops.
• Gasoline production: The oil and gas industry uses drum pumps to transport fluids like oil.
• Chemical processing: Drum pumps are used to move chemicals in a range of chemical processing applications, such as the manufacture of personal care products, food processing, and pharmaceuticals.
• Construction: To transport construction materials like concrete and grout, drum pumps can be used.
• Drum pumps are used in the mining sector to move fluids like chemicals and water.

Stewart County Drum Pump Accessories

• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).

Stewart County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.

They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.

Stewart County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Air Operated Diaphragm Chemical Pumps are a type of fluid-handling equipment that uses air pressure to move fluids. They come in different designs, such as single- and double-diaphragm models, ball valve designs, and nonmetallic wetted part constructions. These pumps are relatively affordable and versatile. They have high flow rates, can prime themselves, and can handle fluids that are abrasive or corrosive.

One key benefit is that they are self-priming and can run dry without damage, meaning they can be used even if the liquid levels fluctuate. Also, they can provide a steady flow rate with very little maintenance. Finally, since these pumps are air operated, they are easy to install and require minimal electricity usage.