Industrial Chemical Pumps in Parke County

Parke County Drum Pump Accessories

  • Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
  • Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
  • AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
  • Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
  • Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
  • SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
Parke County Drum Pump Accessories
Parke County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Parke County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.

They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.

Parke County CENTRIFUGAL PUMPS

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Parke County CENTRIFUGAL PUMPS

  • Maximum working pressure up to 135 PSI (9.3 bar)
  • Sealless design improves reliability with no seal maintenance to perform or seal leaks
  • High specific gravity handling – over 1.8
  • Compact close-coupled design
  • Minimum flow rate is 1 gpm (.23m3/h)
  • Two stage versions contain two impellers, three stage versions contain three impellers
  • Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
  • Heads up to 300 feet (91.5m)
  • Horizontal or vertical (with IEC motor only) installation
  • High power neodymium magnetic drive system handles high specific gravity fluids

Parke County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Air Operated Diaphragm Chemical Pumps are a type of fluid-handling equipment that uses air pressure to move fluids. They come in different designs, such as single- and double-diaphragm models, ball valve designs, and nonmetallic wetted part constructions. These pumps are relatively affordable and versatile. They have high flow rates, can prime themselves, and can handle fluids that are abrasive or corrosive.

One key benefit is that they are self-priming and can run dry without damage, meaning they can be used even if the liquid levels fluctuate. Also, they can provide a steady flow rate with very little maintenance. Finally, since these pumps are air operated, they are easy to install and require minimal electricity usage.

Parke County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Drum Pumps in Parke,

For transfering and dispensing fluids.

Parke County Drum Pumps

Drum pumps are used for a wide range of commercial, industrial, and residential applications which all involve moving liquids from large drums or containers to other locations where the liquid is required. This includes transferring liquids such as water, oil, gasoline, and various other types of chemicals and liquids. Additionally, drum pumps can be used to dispense fluids in specific amounts, making them practical for filling containers and for uses in manufacturing.

Drum Pumps are popular in industries such as mining, agriculture, and manufacturing. Chemical processing industries rely on drum pumps for things like food proccesing and pharmaceuticals. Even water treatment and construction industries use drum pumps as drums are a regular container in these industries.

Parke County Drum Pumps
0 Item | $0.00
View Cart
Call Now Button