Centrifugal Pumps in Sequoyah, OK

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Sequoyah CENTRIFUGAL PUMPS

• Horizontal or vertical (with IEC motor only) installation
• High specific gravity handling – over 1.8
• High power neodymium magnetic drive system handles high specific gravity fluids
• Heads up to 300 feet (91.5m)
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• Two stage versions contain two impellers, three stage versions contain three impellers
• Minimum flow rate is 1 gpm (.23m3/h)
• Maximum working pressure up to 135 PSI (9.3 bar)
• Compact close-coupled design

Sequoyah, OK Drum Pump Accessories

• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction

Sequoyah, OK Small Centrifugal Pumps and How They Work

Centrifugal pumps use a rotating impeller to move fluid through a system. This impeller, which is a disk with vanes or blades attached to it, is driven by a motor and the rotation exerts a centrifugal force that causes the fluid to move away from the center of the disk. Due to the difference in pressure caused by this movement, the fluid is drawn into the pump and moved through the system. In addition to transferring fluids, these pumps can be utilized to transport gases.