Industrial Chemical Pumps in Wanamingo, MN

Wanamingo Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Air Operated Diaphragm Chemical Pumps are a type of fluid-handling equipment that uses air pressure to move fluids. They come in different designs, such as single- and double-diaphragm models, ball valve designs, and nonmetallic wetted part constructions. These pumps are relatively affordable and versatile. They have high flow rates, can prime themselves, and can handle fluids that are abrasive or corrosive.

One key benefit is that they are self-priming and can run dry without damage, meaning they can be used even if the liquid levels fluctuate. Also, they can provide a steady flow rate with very little maintenance. Finally, since these pumps are air operated, they are easy to install and require minimal electricity usage.

Wanamingo, MN Drum Pump Accessories

• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Wanamingo CENTRIFUGAL PUMPS

• Horizontal or vertical (with IEC motor only) installation
• High specific gravity handling – over 1.8
• Minimum flow rate is 1 gpm (.23m3/h)
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• Two stage versions contain two impellers, three stage versions contain three impellers
• Compact close-coupled design
• High power neodymium magnetic drive system handles high specific gravity fluids
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• Maximum working pressure up to 135 PSI (9.3 bar)
• Heads up to 300 feet (91.5m)

Choosing the Correct Drum Pump in Wanamingo MN

When selecting the ideal drum pump for a specific use, there are several factors that should be taken into account. These factors include:

• Power source: Choose a pump that will meet the demands of your application and the type of power source you have available.
• Safety considerations: Pick a pump that complies with applicable safety regulations and is suitable for the unique dangers prevalent in your application. Make sure the pump is explosion-proof, for instance, if you are transporting explosive liquids.
• Volume and flow rate: Consider both the volume and flow rate of the liquid you need to move. Ensure that the drum pump you select has a flow rate that meets your requirements.
• Size and weight: Take into account the size and weight of both the pump and the drum or other container from which you will be transferring the liquid. Verify that the pump can fit inside the drum and is not too heavy to handle.
• Price: Establish your spending limit and select a pump that satisfies your requirements at a cost you are comfortable paying.
• Compatibility with the medium being transferred: Different models of drum pumps are specifically designed to handle different types of liquids. It is crucial to select the pump that is compatible with the type of liquid you need transported, as some liquids or chemicals can be too abrasive or viscous to work with certain models.